產品特點

（1）出色的附著力和印刷適性

（2）對各種塑料基材均有出色的附著力

（3）印刷機上的操作穩定，膠印適性出色

品牌： 歐萊斯

包裝： 1KG/罐  12公斤/箱 

顏色： 紅、黃、藍、黑、白、金紅、大紅

 

產品特點

（1）出色的附著力和印刷適性

（2）對各種塑料基材均有出色的附著力

（3）印刷機上的操作穩定，膠印適性出色

適用范圍

此款歐萊斯金屬印刷UV絲印移印油墨適用于不銹鋼 、光面不銹鋼、金屬、玻璃陶瓷等基材。

使用方法：

1．建議用我公司專用稀釋劑進行稀釋，不建議使用783慢干稀釋劑稀釋，使用前應充分?jǐn)嚢�，用后隨時密封。

2．?dāng)嚢钑r(shí)加本公司配套**10-12%，稀釋到印刷適合粘度，移印稀釋使用移印專用稀釋劑；用718洗網水清洗。

3．不得與其它類型油墨混合使用，否則容易出現其他附著力，化學反應等不良現象。

4. 加入固化劑的油墨使用時限為8小時，過期請棄用，剩余油墨不可回收

注意事項：

1．各種承印物料的外觀相似，但可能會是不同的材料，客戶需先試印，確其符合要求后，再批量生產。

2．在移印過程中，如出現拉絲或散開，可適當加入一些慢干膏即可;

3．環境溫度過高，將會影響油墨原有質量。白色超越150都會變色，烘烤時請用木質材料墊底進行烘烤，不得直接接觸鐵

4．根據氣候變化，請遠離火源，陰暗處15度-30度環境下存放Product i n f ormation

Name: oleser stainless steel UV series ink

Brand: Brand Name:

Packing: 1KG/ 12 kg / box

Color: red, yellow, blue, black, white, red, red

Product features

(1) excellent adhesion and printing

(2) excellent adhesion to all kinds of plastic substrates

(3) the operation of the printing press is stable and the offset is good.

Scope of application

The Las Olas metal printing UV silk screen printing ink is suitable for stainless steel, polished stainless steel, metal, glass, ceramics and other substrates.

usage method：

1 rec o mmended to use my c o mpany‘s special diluent dilution, do not rec o mmend the use of 783 slow dry dilution dilution, before use should be fully stirred, sealed at any time after the.

2. Mixing Cabern e t c o mpanies supporting open water10-12% and dilution to printing for viscosity, printing the dilution used printing special thinner; with 718washing n e t w ork water cleaning.

3 shall not be mixed with other types of ink, or else it is prone to other adhesion, chemical reactions and other undesirable phenomena.

4 add hardener inks use time limit for 8 hours, please not expired, the remaining ink Unrecyclable

Matters needing attention:

1. All kinds of printing material similar in appearance, but may be of different materials, customers need to try printing and ensure its requirements, and then bulk production.

2 in the printing process, such as drawing or spread out, may be appropriate to add some slow dry paste;

3 ambient temperature is too high, will affect the quality of the original ink. More than 150 white will change color when baking, please use woodiness material bottom baking, not in direct contact with iron

4 ac c ording to climate change, please stay away from the fire source, dark place 15 degrees -30 degrees under the environment