汽車消音器專用紗

Glass fiber automobile silencer special roving消音器紗

 

特點:

將連續玻璃纖維吹成蓬松狀，并依據客戶要求包裝和重量，蓬松度可以根據客戶要求調節。

連續玻璃纖維，無飛散問題。

吸音效果好，可以長時間使用。

耐高溫，收縮性極低

孔隙率大，熱傳導性極低

玻璃纖維汽車消音器專用紗適合汽車消音器生產制造，有效降低汽車排氣管道音量，適合各種型號排號汽車。采用將耐溫性玻璃纖維經專用設備膨化后直接充填汽車消音器的方式，這樣不但提高了汽車消音器使用的耐久性，而且有利于提高填充效率，降低生產成本,改善環境。

Features

The continuous glass fiber will be blown into a fluffy shape, and according to customer requirements packaging and weight, the volume can be adjusted according to customer requirements.

Continuous glass fiber, no flying problems.

Sound absorption effect is good, can be used for a long time.

High temperature resistance, very low shrinkage

Large porosity and very low thermal conductivity

Glass fiber automobile silencer special roving suitable for automobile silencer production, effectively reduce the volume of automobile exhaust pipe, suitable for various models of cars. The method of filling the automobile silencer directly after the temperature resistant glass fiber is expanded by the special equipment, This not only improves the durability of the use of the automobile silencer, but also helps to improve the filling efficiency, reduce production costs, and improve the environment

 

包裝：每個紗團用聚乙烯塑料袋進行包裝，然后放入托盤或紙箱，每個托盤可碼放48個或64個紗團，每個紗團重量17-20kg�？筛鶕�(jù)用戶要求增加紗團重量。托盤堆高不大于2層，紙箱堆高不大于5層。

Package

Each direct roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet. Each pallet can stack 48 or 64 rolls .each roll weight is 15-18kg. It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers.

貯存：產品應堆放于干燥涼爽處，如若不用，請勿打開包裝物或扎緊包裝口，以免受潮。

Storage

Product shall be placed under dryness condition and shall no be open the covering membrane until applying. 

訂貨時請注明: ◎產品代號 ◎粗紗Tex值 ◎訂貨總重量 ◎包裝方式 ◎如有特殊要求請注明。

please remark followings in  purchasing order:1 product code2roving TEX 3quantity 4packaging requirement 5special needs can meet according to customer requirements.

技術參數:Technical parameter

產品代號 Product code	TEX	單絲直徑(um) Filament diameter	顏色 Color	燒失量% LOI
E26	1200-9600	24-30	White	0.40-0.80

 

[本信息來自于今日推薦網]