Digital Signal Processor (DSP) Gen.5 Dual SHARC 32-bit, floating point, 96 kHz sampling rate I/O routing 16 x 16 routing and summation matrix Per output channel Built-in EQ station with 8 IIR, 4 FIR EQ filters, Autofilter full-range Array morphing (LF contour, zoom factor), Air absorption compensation filters Internal IIR and FIR EQ algorithms for speaker phase linearization and improved impulse responses Output delay from 0 to 1000 ms Technologies Loudspeaker management L-DRIVE advanced system protection (excursion, temperature and over-voltage) Power management L-SMART adaptive power management Circuits protection Mains and power supply Over and under voltage / over temperature / overcurrent / inrush current protection Power outputs Over current limiting / DC / short circuit / over temperature Inputs / Outputs AVB input with support of Milan seamless dual networking 16 channels 48kHz / 96 kHz from 16 streams of up to 8 channels AES/EBU input (shared connectors with Analog) 2 channels (1 x AES/EBU, 44.1 - 192 kHz sampling rate) With active link and bypass relay Analog input (shared connectors with AES/EBU) 1 channel, link output Loudspeaker output 1 SC32 connector (37 pins utilizing 32 conductors) Control and monitoring Network connection Dual-port Ethernet Gigabit interface etherCONTM I/O General Purpose Inputs / Outputs (GPIO) 3 GPIO, isolated optocoupler inputs, isolated relays contacts Third-party control solutions Q-SYS® / Crestron® Operating conditions Temperature Room temperature from -5º C / 23º F to +50º C / 122º F Physical data Dimensions W x H x D 483 x 88 (2U) x 510 mm / 19 x 3.5 (2U) x 20.1 in Weight 15.8 kg / 34.8 lb